LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Pulling tapered roller bearing outer races into rear axle housing - AR35.31-P-0550-14C

Pulling tapered roller bearing outer races into rear axle housing - AR35.31-P-0550-14C

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installer (116 589 11 61 00)
G04636490Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Pull front tapered roller bearing outer race (43e) and rear tapered roller bearing outer race (46b) all the way into rear axle housing using SPECIAL TOOL installer (060a, 060c, 060d).

    IMPORTANT Ensure that the shim (45) is inserted. Do not tilt tapered roller bearing outer races (43e), (46b) when pulling in.

    Fig 2: Pulling Tapered Roller Bearing Outer Races Into Rear Axle Housing
    G04636491Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals