Pressing tapered roller bearing outer races out of and into bearing cover - AR35.31-P-0550-41D

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pressing-Out Device (116 589 00 35 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Pulling-In Device (116 589 11 61 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Pressing out

Press out tapered roller bearing outer races using pressing-out device (026a-c).

Mark tapered roller bearing outer races.

Fig 3: Pressing Out Tapered Roller Bearing Outer Races
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Pressing in

Press new tapered roller bearing outer race into bearing cover (27b or 27c) using 88 mm dia. washer (060e) from pulling-in device part 05.

Standard rear axle center assembly illustrated

Fig 4: Pressing Tapered Roller Bearing Outer Race Into Bearing Cover

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.