Programming control module for TELE AID emergency call system - AR82.95-P-0005-02A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Prerequisites:
Vehicle must be located outdoors.
GPS and GSM reception must be present!
Procedure:
- Read out vehicle data with HHT and write down.
- Remove SIM card from handset (if present).
- Ignition: OFF.
- Ignition: On or switch on telephone.
- Enter PIN for Telematik SIM on handset and export to TELE AID control module (see Operating instructions):
- Connect DAS (Star diagnosis) to vehicle and select model "129".
- Select menu "Information/Communication".
- Select TELE AID or E-Call emergency call systems.
- Select menu "Adapt control modules".
- Select "Read coding, change if required".
- Select model "140".
- Code emergency call (only if required).
- Enter airbag control module part number.
- Set D2B to "not present".
- Transfer coding data to control module.
- Enter chassis number VIN.
- Quit DAS (Star diagnosis).
- Enter vehicle data into new TELE AID control module with HHT.
- Authorize emergency call system with provider (see Operating instructions).