LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Electrical System - Body - 140 Chassis) >> Testing & Repair >> Removing and installing language control module - AR82.70-P-0001A

Removing and installing language control module - AR82.70-P-0001A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 140.### 1A as of 123447, 210.0 /2 with CODE (813b) Voice activation system (VAS) 

Fig 1: Identifying Language Control Module Components
G04633810Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
REMOVINGINSTALLING Removing, installing     
1 Remove CTEL transmitter-receiver (A35) On models 140, 210.0 AR82.70-P-8911Z 
    On model 210.2 AR82.70-P-8911A
2 Unscrew screws (2) and remove cover (1)    
3 Engage wire clip (3) in hole (arrow) of the voice activation module (A35/10a1)    
4 Carefully pull out voice activation module    
5 Install in reverse order IMPORTANT Carefully push voice activation module into the guide rail on the connection coupling