LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Electrical System - Body - 140 Chassis) >> Testing & Repair >> Removing and installing TELE AID emergency call system pushbutton switch - AR82.95-P-0002A

Removing and installing TELE AID emergency call system pushbutton switch - AR82.95-P-0002A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 140.03 /04 /05 with CODE (348) TELE AID emergency call system 

Fig 1: Identifying TELE AID Emergency Call System Pushbutton Switch Components
G05440490Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
REMOVINGINSTALLING Removal, installation    
1 Disconnect ground lead from battery    
2 Remove overhead control panel control module IMPORTANT Disconnect TELE AID pushbutton switch connector (S93/3x1)  
3 Release in-car temperature sensor (B10/4) by turning slightly to right and pull upward    
4 Open SOS flap (1)    
5 Unclip TELE AID pushbutton switch (S93/3) and screw out downward    
6 Install in opposite order