LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Electrical System - Body - 140 Chassis) >> Retrofitting & Conversion >> Removing and installing global positioning system (GPS) control module - ra82001407473x(7473)

Removing and installing global positioning system (GPS) control module - ra82001407473x(7473)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Model 140 up to approx. 11/96 

Fig 1: Identifying (GPS) Control Module Components
G05440572Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Quiescent current retention unit disconnect, connect.
Ground lead on battery disconnect, connect.
Holder (1) remove, install.
Electrical connections on control module (N41/2) disconnect, connect.
Control module (N41/2) remove from holder (1), install.
NOTE: As of approx. 12/96 the GPS control module (N14/2) is integrated into the navigation processor.
COMMERCIALLY AVAILABLE TESTER

Quiescent current retention unit e.g. Hans Zeheter CMP 12.2