LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Interior Equipment - 140 Chassis) >> Repair & Adjustments >> Removal and installation of the paneling in the trunk - ra68001400480x(0480)

Removal and installation of the paneling in the trunk - ra68001400480x(0480)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Model 140 

Fig 1: Identifying Panelling In Trunk Components
G05440365Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Cover (1) remove.
Bulb holder for left taillamp open.
Panelling (2) remove, by removing three plug-in clips (arrows) and pull out panelling (2) starting at the top.
Stowage compartment (4) remove.
Spare wheel cover open and remove plug-in clip in the front of the spare wheel recess (arrow).
Bulb holder for right taillamp open.
Panelling (3) remove, by removing the remaining plug-in clips (2 pieces, arrows) and pull out panelling starting at the top.
Panelling (5) remove (panelling on rear center panel removed, 68-485) and remove plug-in clip (5 pieces).
Panelling (6) remove (10 plug-in clips) and remove panelling (6).
Reinstall in opposite order.