Function of the injection system: - ra07196020010x(0010)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
S. Injection lines Engine 602.96, 603.96/97 TURBO (Model 463.3: pay attention to variations)
S. Injection lines
The injection lines are designed so as to allow the injection pump to swivel when the engine is running.
NOTE:
The plastic clips (68 and 68a) must be fitted as close as possible to the radius of the injection lines (arrows). The plastic clips (71) must be locked in place.