Remove/install front transmission cover with primary pump - AR27.30-P-0640A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

TRANSMISSION 722.5

Fig 1: Identifying Front Transmission Cover With Primary Pump Components

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Removing
1	Unscrew hexagon bolts (18)
2	Pull out front transmission cover (10) by screwing two bolts (18) into the threaded holes (arrows)	Do not pry off transmission cover (10) using the bolts (18) According to condition: ↓
		Disassemble front transmission cover with primary pump	AR27.30-P-0660A
	Install
3	Clean sealing surface of front transmission cover	Replace gasket (19) It must not be coated with sealant
4	Insert front transmission cover (10)
5	Screw in hexagon bolts (18) and tighten	Coat bolts with non -curing sealant	*BR00.45-Z-1006-01A
			*BA27.30-P-1001-01A

FRONT TRANSMISSION COVER

Number	Designation		Transmission 722.5
BA27.30-P-1001-01A	Bolt, front transmission cover to transmission housing	Nm	13

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1006-01A	Loctite 573	Henkel Loctite Deutschland GmbH Arabellastrasse 17 81925 Munchen Germany Tel. +49 899268-0 Fax + 49 899101978 www.Loctite.de