Measure end play between park pawl gear and grooved ball bearing - AR27.50-P-0600-06A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Test values for gear set
| Number | Designation | Transmission 722.6 | Transmission 722.9 | |
|---|---|---|---|---|
| BE27.50-P-1004-01A | End play between park pawl gear and grooved ball bearing | mm | 0.3...0.5 | 0.20...0.40 |
- Fit parallel support (029) on transmission housing. Using the depth gauge measure from the parallel support (029) to the park pawl gear (15).
- Using the depth gauge measure from the parallel support (029) to the contact surface of the grooved ball bearing (67) in the transmission housing.
- Adjust the axial play "E" by means of shim as per the calculation example.
Example calculation:
Dimension "a" 49.9 mm
Dimension "b" 49.0 mm
Difference 0.9 mm
Axial play "E" - 0.4 mm
Shim 0.5 mm
- Install the corresponding shim.
Shims are available in thicknesses of 0.2 to 0.5 mm. The graduation is 0.1 mm.
Determine measurement "a"
Determine measurement "b"