Dismantling and assembling overdrive clutch - AR27.51-P-0760A: Notes
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION 722.5
| Dismantling | |||
| 1 | Remove snap ring (174) from multi-disc carrier (172) | ||
| 2 | Remove multi-disc pack (176-178) and disc spring (175) | ||
| 3 | Place assembly device (020) on the spring plate (180) until the snap ring (179) is exposed | Figure | |
| 4 | Remove snap ring (179) | ||
| 5 | Remove spring plate (180), pressure springs (182) and radial lip-type sealing ring (181) | ||
| 6 | Withdraw piston (183) from outer multi-disc carrier (172) | ||
| Assembling | |||
| 7 | Assemble and measure overdrive clutch | AR27.51-P-0760-01A |
TEST VALUES OF MULTI-DISC CLUTCH
| Number | Designation | Transmission 722.5 | |
|---|---|---|---|
| BE27.51-P-1001-01A | Play in overdrive multi-disc clutch | mm | 1.5 - 2.1 |