Center shift modified - BT27.60-P-0001-01A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 722.6 phased in
TRANSMISSION 722.6
The center shift has been modified to improve operating convenience and dampen noise.
The intermediate lever (97) is rigidly connected to the shift shaft (116). A sleeve (137) with locking lever (136) is arranged on the shift shaft in such a way that it can move.
A roller (138a) attached to the shift detent carrier and two rubber stops (128b) on the shift gate (128) dampen noise during the transverse movement of the selector lever.