Additional shim between deep-groove ball bearing and output flange - BT27.10-P-0005-01A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 722.6
TRANSMISSION 722.6## (except 722.66) ## as of 1658778 as of 19.7.99
TRANSMISSION 722.6## ## as of 1658778 as of 19.7.99
In order to avoid load change noise during driving, and to provide an additional safeguard against slackening of the twelve-point nut, a shim with a thickness of 0.3 mm is installed between the deep-groove ball bearing and the output flange.