Connecting rear propeller shaft to rear axle center assembly - AR41.10-P-0050-04DA
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
| Number | Designation | Model 140 | ||
|---|---|---|---|---|
| BA41.10-P-1002-01A | Self-locking nut, flexible disk to rear propeller shaft or rear axle center assembly | M10 | Nm | - |
| M12 | Nm | 60 | ||
Replace self-locking nuts (26).
Connect rear propeller shaft to rear axle center assembly.
Arrangement of 4-arm propeller shaft flange, models 140.04/05/07
Arrangement of 4-arm propeller shaft flange with vibration damper (20), model
Arrangement of 3-arm propeller shaft flange, models 140.02/03