Mounting new protective cap on grooved ball bearing - AR41.10-P-0100-04DA

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Alignment Tool (126 589 03 15 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Alignment Tool (201 589 07 15 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Mount new protective cap (6) using alignment tool (05).

Models 129, 140, 202.028 :

126 589 03 15 00

Models 202.01, 202.020/022, 202.1 :

201 589 07 15 00

Ensure that the protective cap contacts the grooved ball bearing (8) (refer to detail).

Use the protective cap (6)once only.

Fig 3: Identifying Protective Cap, Alignment Tool & Grooved Ball Bearing

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.