Removing and installing exhaust system complete - AR49.10-P-7000D
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE 104 in MODELS 124, 129, 140, 202
ENGINE 111 in MODELS 124, 202
Fig 1: Identifying Exhaust System Complete Remove/Install Components - Model 124 Sedan With Engine 104
Fig 2: Identifying Exhaust System Complete Remove/Install Components - Model 124 Sedan With Engine 111
| Removal, installation | |||
| 1 | Replace rivet nuts in exhaust manifold | if necessary | AR49.10-P-5531-01DA |
| 2 | Replace self-locking nuts, bolts and gaskets. Ensure the gaskets and flanges are correctly installed. | Use emery cloth to clean off combustion and corrosion residues at connection points | |
| 3 | Pay attention to installation of the threaded plate | AR49.10-P-5531D | |
| 4 | |||
| 5 | Remove cross strut of left frame | Model 129 | |
| *BA61.10-P-1001-01A | |||
| 6 | Install in reverse sequence | Model 202.028 E 36 AMG: pay attention to installation position and suspension of rear muffler, see ↓ |
*BA61.10-P-1001-01A |
| Notes on installation position and suspension of rear muffler | AH49.10-P-1000-02A | ||
| Notes re disposing of catalytic converters | On models with catalytic converter code 620a | OS49.10-P-1000-01A |
| Number | Designation | Model 129 | |
|---|---|---|---|
| BA61.10-P-1001-01A | Self-locking bolt of rear cross strut to frame floor | Nm | 120 |