LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> E420 >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Cooling System - 140 Chassis) >> Repair & Adjustments >> Removing and installing coolant thermostat - RA20001041100X(20-1100) >> Removing and installing coolant thermostat - RA20001191100X(20-1100)

Removing and installing coolant thermostat - RA20001191100X(20-1100)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Operation no. of operation texts and work units or standard texts and flat rates

20-2460-2482

Fig 1: Identifying Coolant Thermostat Remove/Install Components
G04679213Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Coolant at radiator drain Draining, pouring in coolant - anti-freeze protection table .
Model 129: dipstick guide tube from cylinder head unscrew, screw on.
Coolant hose (1) at thermostat housing detach, attach.
Coolant thermostat housing cap (2) detach, attach (10 Nm).
Coolant thermostat (4) remove.
O-ring (3) replace.
Coolant thermostat install.
Installation note 
The ball valve (arrow) must be at the highest point.
Coolant pour in Draining, pouring in coolant - anti-freeze protection table .
Leaks check.