Removing and installing vehicle interface (cellular telephone) - AR82.70-P-8920J
MODEL 202.018 /02 /12 /13, 208.3 with CODE (317) D-network cellular telephone (D2B)
Illustrated on model 202 Sedan
Fig 1: Identifying Vehicle Interface (Cellular Telephone) Remove/Install Components - Illustrated On Model 202 Sedan
| Removal, installation | |||
| 1 | Connect quiescent current retention unit | *WH58.30-Z-1012-09A | |
| 2 | Disconnect ground lead from battery | AR54.10-P-0003A | |
| 3 | Remove side paneling on left in trunk | ||
| 4 | Unscrew nut (2) | ||
| 5 | Carefully lift mount (1) with control modules out of wheelhouse | ||
| 6 | Pull and unlock coupling on CTEL telephone (A34/4) | ||
| 7 | Loosen sheet metal screws (3) | ||
| 8 | Remove CTEL telephone (A34/4) | ||
| 9 | Install in opposite order |
COMMERCIALLY AVAILABLE TOOLS
| Number | Designation |
|---|---|
| WH58.30-Z-1012-09A | Quiescent current retention unit |