Information on Tele Aid emergency call system - AH82.95-P-0001-01A

Models 140, 210 

System shown in model 140 sedan 

TELE AID is an emergency call system in which a telephone link to an emergency call center is established automatically after the system is activated.

Improper activation of an emergency call is prohibited and may be the subject of a fine.

If the system is activated inadvertently, always wait for the call from the emergency call center and advise the center that the system is activated inadvertently to ensure that no further rescue measures are initiated.

The system is activated automatically if an airbag has been deployed or if a vehicle rollover has been detected.

The system is activated manually with the TELE AID emergency call system push-button switch (S93/3) in the overhead control panel.

When carrying out repair work on vehicles fitted with TELE AID, always ensure that the ignition key has been withdrawn from the ignition lock.

When carrying out work in the area of the overhead control panel, on wiring harnesses or in the area of the TELE AID for cellular telephone control modules, disconnect the battery.

The TELE AID control module is equipped with an integrated turnover sensor. This control module must never be turned out of its longitudinal or transverse axis when terminal 15R: ON.

The ignition key must always be withdrawn before carrying out towing or recovery operations on a vehicle fitted with the TELE AID system!