Removal and installation of the pneumatic actuating element for the closing aid on the front and rear doors and trunk lid - ra72001400266x(0266)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Model 140
Preliminary work:
Lock on driver's door removed (Removal and installation of the driver's door lock )
Lock on rear door removed (Removal and installation of the rear door lock )
shown on front door lock
| Screwdriver | insert between actuating element (10) and mounting plate (30) and press up. |
| Actuating element (10) | press to side with linkage (20) and remove. |
| Reinstall in opposite order. | |
| Perform function check. |