Transponder coil, location/purpose/function - GF80.30-P-4007A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 129, 140, 210 (except, 210.072) as of 1.6.96, 210 / (except 210.2 /081) as of 1.6.96 up to 28.2.97
MODEL 170, 210.072 /2 (except, 210.281) up to 28.2.97
MODEL 202 (except 202.083) as of 1.8.96 up to 31.5.97
MODEL 202.083 up to 31.5.97
| Purpose | The transponder coil (L11) serves as the data link between the transponder and DAS infrared control module (N54/1). | ||
| Function | After the ignition is switched ON the coil for the transponder (L11) is actuated by the DAS infrared control module (N54/1) supplying power to the transponder in the key also containing a coil inductively via the resulting field. | ||
| Location | Plugged on to the ignition/starter switch. |