LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Anti-Theft & Central Locking System - 140 Chassis) >> Basic Knowledge >> Removing and installing tank flap actuator - ra80001400230x(0230)

Removing and installing tank flap actuator - ra80001400230x(0230)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Central Locking System Model 140 

Operation no. of operation texts and work units or standard texts and flat rates 80-3105

Fig 1: Identifying Tank Flap Actuator Components
G05440444Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Lining (1) on right-hand side of trunk remove, install.
Retaining tab (2) press out to remove actuator.
Pneumatic line (4) lever off with open-end wrench (width across flats 7).
Actuator (3) check pneumatic function. Diagnosis manual body, volume 1.
Pneumatic line clip into actuator (3) to install.
Actuator (3) clip into guide sleeve (6) to install.