LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Seats, Restraint Systems - 140 Chassis) >> Repair & Adjustments >> Removal and installation of oddment box in rear - ra91001400250x(0250)

Removal and installation of oddment box in rear - ra91001400250x(0250)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Model 140 (Coupe) 

Preliminary work:

Both rear seat cushions and rear backrests removed (Removal and installation of rear seat and backrest  )

Arm rest in rear removed (Removal and installation of rear seat folding arm rest  )

Fig 1: Identifying Retractable Cover, Oddments Box And Wooden Cover
G05441330Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Identifying Oddments Box And Wooden Cover With Ashtray Housing
G05441331Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 3: Identifying Ashtray Housing
G05441332Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 4: Identifying Oddments Box
G05441333Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Retractable cover (4) on oddments box (1) open.
Rear ashtray (2) open.
Wooden cover (3) unclip at front with small screwdriver (arrows).
Wooden cover (3) pull up to remove and disconnect plug connectors.
Ashtray housing (2) unclip at top (arrows) and remove.
Disconnect plug connection.
Oddments box (1) unclip at sides on brackets (arrows) on left and right.
Oddments box (1) remove upward while guiding wires through.
Reinstall in opposite order. Check for proper function.

Repair note 

The retractable cover (4) can be pulled out toward the front after separating the two housing shells (1 and 6) from one another.

Fig 5: Identifying Retractable Cover
G05441334Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

The wooden cover (5) can be unclipped on the inside of the housing shell (1, arrows) and removed toward the front.

Fig 6: Identifying Wooden Cover
G05441335Courtesy of MERCEDES-BENZ OF NORTH AMERICA.