Check connecting flange axial play, adjust - AR35.31-P-0540-02C
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TEST VALUES FOR CONNECTING FLANGE/DIFFERENTIAL CASE
| Number | Designation | Model 129 | Model 140 | Model 170 | |
|---|---|---|---|---|---|
| BE35.31-P-1001-05A | Axial play between connecting flange and differential case | mm | 0.03...0.3 | 0.03...0.3 | 0.03...0.3 |
TEST VALUES FOR CONNECTING FLANGE/DIFFERENTIAL CASE
| Number | Designation | Model 202 | Model 203.006/016/064/206/216/264/706 Model 203.004/204 with code 450 | Model 203.018/065/218/265/718 | Model 208 | |
|---|---|---|---|---|---|---|
| BE35.31-P-1001-05A | Axial play between connecting flange and differential case | mm | 0.03...0.3 | 0.03...0.3 | 0.03...0.3 | 0.03...0.3 |
TEST VALUES FOR CONNECTING FLANGE/DIFFERENTIAL CASE
| Number | Designation | Model 209 | Model 210 | |
|---|---|---|---|---|
| BE35.31-P-1001-05A | Axial play between connecting flange and differential case | mm | 0.03...0.3 | 0.03...0.3 |
TEST VALUES FOR CONNECTING FLANGE/DIFFERENTIAL CASE
| Number | Designation | Model 215 | Model 220 | |
|---|---|---|---|---|
| BE35.31-P-1001-05A | Axial play between connecting flange and differential case | mm | 0.03...0.3 | 0.03...0.3 |
- Check axial play between connecting flange (33) and rear axle side gear (17), fitting a thicker or thinner circlip (30a) if necessary.
The axial play must be within the specified tolerance range otherwise the connecting flange (33) and rear axle side gear (17) will be damaged.
Circlips (30a) are available in thicknesses from 1.4 mm to 2.7 mm in 0.05 mm graduations.
Illustration shows rear axle center assembly ø 198 mm