LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Remove/install inside CV joint or rubber boots on rear axle shaft - AR35.30-P-0660A >> Installing end cover and cup seal on joint ring - AR35.30-P-0660-01A

Installing end cover and cup seal on joint ring - AR35.30-P-0660-01A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 129.058/059/060/061/063/064 Model 129.066/067/068/076 Model 140.02/03/1
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 120 150 120
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 120 120 120
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 140.04/05/06/07 Model 170.435/444 Model 170.445/447/449/465/466
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 100 120 100
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 100 120 100
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 202.018/020/022/023/025/026/078/080/081/082/083/086/087/088/120/121/122/125/180/182 Model 202.024/028/029/033/085/089/093/128/133/134/188/193/194 Model 208.335/335/344/435/444/ 445
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 150 100 100
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 120 100 100
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 208.347/347/348/370/374/ 447/448/ 448/465 Model 208.474 Model 209.316 with transmission 716 Model 209.365/465
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 120 150 120
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 120 130 120
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 209.316 with transmission 722 Model 209.341/342/343/361 Model 209.441/442
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 120 100 100
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 140 100 120
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 209.372/375/376/377/472/475/476/477 Model 209.461 with Transmission 716 Model 209.461 with Transmission 722
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 150 100 85
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 140 120 100
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation MODEL 210.003/004/010/035/037/048/061/062/210/235/237/248/261/262/610 Model 210.006/007/015/016/017/020/025/026/045/053/055/063/065/07/08/206/215/216/217/225/226/245/263/265/27/28/606/616/617/663 Model 215.375/376/378
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 100 120 150
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 100 120 120
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 215.373/374 Model 220.026/063/065/067/070/083/084/087/126/163/165/167/170/183/184/187 Model 220.025/028/073/075/125/128/173/175/875/878
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 150 120 150
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 150 120 120
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 220.074/174/176/178 Model 230.474/476
BF35.30-P-1001-01A Filling capacity Inner constant-velocity joint g 150 150
BF35.30-P-1002-01A Filling capacity Outside constant velocity joint g 150 150
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 203.004/204 with code 450, inserted axle shaft Model 203.004/204 with code 450, screwed axle shaft Model 203.006/206/706 with transmission 722
BF35.30-P-1001-01D Filling capacity Inner constant-velocity joint g 120 120 120
BF35.30-P-1002-01D Filling capacity Outside constant velocity joint g 140 120 120
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 203.006/206/706 with screwed rear axle shaft Model 203.006/206/706 with inserted axle shaft, except transmission 722 Model 203.008/016/20 8/216/708 with transmission 722, model 203.007/207 with transmission 722 and code 450
BF35.30-P-1001-01D Filling capacity Inner constant-velocity joint g 120 120 105
BF35.30-P-1002-01D Filling capacity Outside constant velocity joint g 120 140 120
FLUID SPECIFICATION REAR AXLE SHAFT

Number Designation Model 203.016/216 except trans. 722
BF35.30-P-1001-01D Filling capacity Inner constant-velocity joint g 150
BF35.30-P-1002-01D Filling capacity Outside constant velocity joint g 130
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1008-01A Curil sealing compound ElringKlinger AG
Max-Eyth-Strasse 2
72581 Dettingen/Ems
Germany
Tel. +49 7123 724-0
Fax +49 7123 724 9006
www.elringklinger.de
BR00.45-Z-1010-01A Sealant A 001 989 25 20
BR00.45-Z-1009-01A Sealant A 001 989 89 20
  1. Fill CV joint with specified quantity of grease from repair kit.
  2. Clean the sealing surfaces of the end cover and cup seal on the joint ring and coat with one of the specified sealing compounds.
  3. Fit new end cover and cup seal.

Shown: Rear axle shaft as full shaft 

Fig 1: Applying Sealing Compound To CV Joint - Shown On Rear Axle Shaft As Full Shaft
G04713443Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals