Removal and insertion of attachment bolt, camber strut on rear axle carrier - AR35.20-P-0110-01A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Lower axle half until the hexagon or polygon-head bolt (2a) can be taken out or inserted below the spring dome (2g).
Note installed position to ensure sufficient clearance between bolt head and frame floor.