Remove/install and secure rear axle shaft twelve-point collar nut - AR35.30-P-0115-01A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

REAR AXLE SHAFT
| Number |
Designation |
Model 129 |
Model 140 |
Model 170 |
| BA35.30-P-1001-01A |
Collar nut, rear axle shaft to rear axle shaft flange |
1st stage |
Nm |
220 |
320 |
220 |
| Stage 2 |
∠ ° |
- |
- |
- |

REAR AXLE SHAFT
| Number |
Designation |
Model 202 |
Model 203 |
Model 208 |
| BA35.30-P-1001-01A |
Collar nut, rear axle shaft to rear axle shaft flange |
1st stage |
Nm |
220 |
220 |
220 |
| Stage 2 |
∠ ° |
- |
- |
- |

REAR AXLE SHAFT
| Number |
Designation |
Model 209 |
Model 210.0 |
Model 210.2/6 |
| BA35.30-P-1001-01A |
Collar nut, rear axle shaft to rear axle shaft flange |
1st stage |
Nm |
220 |
220 |
320 |
| Stage 2 |
∠ ° |
- |
- |
- |

REAR AXLE SHAFT
| Number |
Designation |
Model 211 |
Model 215 |
| BA35.30-P-1001-01A |
Collar nut, rear axle shaft to rear axle shaft flange |
1st stage |
Nm |
320 |
320 |
| Stage 2 |
∠ ° |
- |
- |

REAR AXLE SHAFT
| Number |
Designation |
Model 220 |
Model 230 except 230.479 |
Model 230.479 |
| BA35.30-P-1001-01A |
Collar nut, rear axle shaft to rear axle shaft flange |
1st stage |
Nm |
320 |
320 |
150 |
| Stage 2 |
∠ ° |
- |
- |
45 |
Detaching
- Apply parking brake
- Unscrew the twelve-point collar nut (12) that attaches the rear axle shaft.
Mount on and secure
Replace twelve-point nut.
- Tighten twelve-point collar nut (12)
.
- Use caulker to secure twelve-point collar nut (12) with no residual gap between the groove and the securing tabs (arrow).
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
- Release parking brake.