LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-09A

Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-09A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Removal And Installation Tool (140 589 10 43 00)
G04636421Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Mount remover and installation tool (038) on the rear axle housing.
  2. Using thrust piece (038a) part 16, pull the large tapered roller bearing outer race (46b) out of the rear axle housing.
    Fig 2: Removing Tapered Roller Bearing Outer Races From Rear Axle Housing
    G04636422Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  3. Using thrust piece (038b) part 18, press out the small tapered roller bearing outer race (43e).
  4. Detach remover and installation tool (038).
    Fig 3: Identifying Thrust Piece
    G04636423Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals