LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-02A

Removing tapered roller bearing outer races from rear axle housing - AR35.31-P-0550-02A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Spring Compressor (116 589 18 61 00)
G04636399Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Insert assembly arbor (046) for differential pinions on right-hand side and press complete differential to the left until it touches the rear axle housing.
    Fig 2: Inserting Assembly Arbor For Differential Pinions
    G04636400Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  2. Remove left and right tapered roller bearing outer race (11a).

    IMPORTANT Mark tapered roller bearing outer races.

    Fig 3: Identifying Left And Right Tapered Roller Bearing Outer Race
    G04636401Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals