LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Pulling off joint flange - AR35.31-P-0550-06A

Pulling off joint flange - AR35.31-P-0550-06A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Puller (129 589 01 33 00)
G04636413Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Pull joint flange off drive pinion, if necessary use puller (062).

    IMPORTANT If necessary, mark joint flange with respect to drive pinion.

    Fig 2: Pulling Joint Flange Off Drive Pinion Using Puller
    G04636414Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals