LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Pressing drive pinion out of rear axle housing - AR35.31-P-0550-07A

Pressing drive pinion out of rear axle housing - AR35.31-P-0550-07A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Puller (000 589 65 33 00)
G04636417Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Press drive pinion (47) lout of rear axle housing using puller (065) and remove.

    NOTES When prying off, hold drive pinion (47) SPECIAL TOOL and puller (065). The drive pinion or rear axle housing might otherwise be damaged.

    Shown: 198 mm dia. rear axle center assembly 

    Fig 2: Pressing Drive Pinion Out Of rear axle Housing - Shown: 198 Mm Dia. Rear Axle Center Assembly
    G04636418Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals