LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Measure expanded dimension of rear axle housing - AR35.31-P-0550-24A

Measure expanded dimension of rear axle housing - AR35.31-P-0550-24A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
REAR AXLE HOUSING EXPANSION (SPREAD DIMENSION)

Number Designation Models 129.058/063 as of 01.06.94, Models 129.059/064 Models 140.02/03 as of 01.06.94 Type 170.465/466
BE35.31-P-1003-04A Setting for rear axle housing expansion (spread dimension) mm 0,11-0,17 0,11-0,17 0,11-0,17
REAR AXLE HOUSING EXPANSION (SPREAD DIMENSION)

Number Designation Model 202.033/093/ 133/193, Model 202.085 with manual 5 speed transmission, Models 202.134/194 with code 450 Model 203.006/064/206 /264/706, Model 203.004/204 with code 450 Model 208.365/370/46 5/470
BE35.31-P-1003-04A Setting for rear axle housing expansion (spread dimension) mm 0,11-0,17 0,11-0,17 0,11-0,17
REAR AXLE HOUSING EXPANSION (SPREAD DIMENSION)

Number Designation Model 210.006/015/017/ 025/045/053/055/063/ 065/08/206/215/217/ 225/245/263/265/28/ 606/663, Model 210.007 with code 450 Models 220.063/065/067/083/ 084/087/165/167/183/ 184/187
BE35.31-P-1003-04A Setting for rear axle housing expansion (spread dimension) mm 0,11-0,17 0,11-0,17
TEST VALUES FOR REAR AXLE HOUSING EXPANSION

Number Designation Models 209.316/342/ 343/361/375/ 376/442/461/ 475/476
BE35.31-P-1003-04C Setting for rear axle housing expansion (spread dimension) mm 0.14...0.20
Fig 1: Identifying Spreader (140 589 05 31 00)
G04636578Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Identifying Contact Arm (126 589 08 21 00)
G04636579Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Measure spread dimension (expansion) of the rear axle housing again using a measuring bracket (059).

    IMPORTANT If the spread dimension is outside the specification, make a note of this value for the time being.

  2. Remove contact arm (059).
    Fig 3: Measuring Spread Dimension Of The Rear Axle Housing Again Using A Measuring Bracket
    G04636580Courtesy of MERCEDES-BENZ OF NORTH AMERICA.