LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassembling and assembling rear axle differential, adjusting gear set - AR35.31-P-0550A >> Installing drive pinion in rear axle housing - AR35.31-P-0550-15A

Installing drive pinion in rear axle housing - AR35.31-P-0550-15A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Removal And Installation Tool (140 589 10 43 00)
G04636492Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Insert drive pinion (47) in the rear axle housing and support using the removal and installation (038).

    IMPORTANT To do this, screw in the spindle slightly by hand.

    Fig 2: Installing Drive Pinion In Rear Axle Housing
    G04636493Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals