LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Pressing tapered roller bearing inner race onto drive pinion - AR35.31-P-0550-12C

Pressing tapered roller bearing inner race onto drive pinion - AR35.31-P-0550-12C

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
REFER TO SHOP-MADE TOOLS Press-on sleeve for tapered roller bearing inner race WF58.50-P-3531-03B
  1. Press tapered roller bearing cone (46a) onto the drive pinion (47) using the shop-made press-on sleeve (011).

    IMPORTANT For pressing on, use the side of the press-on sleeve (011) marked with "B".

    Fig 1: Identifying Tapered Roller Inner Race And Drive Pinion
    G04636444Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals