LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Rear Axle - 140 Chassis) >> Testing & Repair >> Disassembling and assembling rear axle, adjusting gear set - AR35.31-P-0550 >> Disassemble/assemble rear axle center assembly, adjusting gear set - AR35.31-P-0550D >> Pressing radial seal ring into bearing cover - AR35.31-P-0550-42E

Pressing radial seal ring into bearing cover - AR35.31-P-0550-42E

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
  SPECIAL TOOL Replace radial seal ring and smear sealing lip with Universal hypoid transmission fluid: ↓
  Universal hypoid transmission fluid BB00.40-P-0235-07A
Fig 1: Identifying Removal And Installation Tool (129 589 02 43 00)
G04635115Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig 2: Identifying Drift Punch (126 589 04 15 00)
G04635116Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  1. Smear sealing lip of new radial seal ring with Universal hypoid transmission fluid.
  2. Mount bearing cover (27c) on removal and installation tool (030a) part 01.
  3. Press radial seal ring into bearing cover (27c) using drift punch (032c).
    Fig 3: Pressing Radial Seal Ring Into Bearing Cover
    G04635117Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals