LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Electrical System - Body - 140 Chassis) >> Maintenance >> Checking all the functions of the front and rear lights - wh8251pkw0000x(8251)

Checking all the functions of the front and rear lights - wh8251pkw0000x(8251)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Model 107 from 8/85; 123; 124, 129, 140 up to 6/93; 126 from 9/85; 201 from 1/85 

IMPORTANT Before working on vehicle with engine running, apply parking brake.

On vehicles with automatic transmission, shift transmission to "P".

Fig 1: Checking Front And Rear Lights
G05440499Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Lenses on front and rear lights check for damage.
Hazard warning system and indicator lamps check.
NOTE: Key in steering wheel lock in position "0".
 
Instrument and switch lamps. check.
Parking lamps/tail lamps check.
Low beam headlamps check.
High beam headlamps and high beam indicator check.
Parking lamp, left and right check.
Fog lamps/rear fog lamp and indicator lamp check.
Stop lamp check.
Reversing light check.
CHECKING HEADLAMP HEIGHT ADJUSTMENT

Engine allow to run.
Low beam headlamps switch on.
Control switch for headlamp range control move to various positions. The two light beams from the headlamps should move uniformly.

Checking headlamp adjustment with adjustment unit 

NOTE: Observe operating instructions for adjustment unit.
Vehicle park on level surface unladen.
NOTE: On vehicles with level control or hydropneumatic suspension (HPF), allow engine to run at medium speed for approx.

30 seconds. Move vehicle forward and backward to allow correction of axle.

Specified tire pressure check.
Driver's seat load with 75 kg or one person.
Control switch for headlamp range control set to "0".
Main headlamps/low beams, high beams check, adjust, if required.
Fog lamps check, adjust, if required.
MODEL 124.036

High beams check, adjust, if required.
NOTE: Detailed description for adjustment of headlamps (RI 82-040 or 82-1130).
COMMERCIALLY AVAILABLE TESTER

Designation e.g. company, order no.
Adjustment unit for headlamps Bosch