Removal and installation of the lamp failure monitoring unit - ra54001406075x(6075)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Model 140
Operation no. of operation texts and work units or standard texts and flat rates
| Ground cable at battery | disconnect, connect. |
| Fuse box cover (1) | take off, fit on. |
| Wiper system relay (K26) | take out of holder, insert. |
| Wiper system relay holder (2) | take off, fit on. |
| Screws (3) | unscrew, screw in. |
| Relay box cover (4) | take off, fit on. |
|
NOTE:
As of 09/95 it is first necessary to remove the combination relay (N10/2).
|
|
| Lamp failure monitoring unit (N7) | remove, insert; insert the retaining lug (arrow) first. |
|
NOTE:
As of approx. 2/94 the lamp failure monitoring unit (N7) is held in place with an additional bracket.
|