Removal and installation of the electronic board - ra54001406040x(6040)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
Model 140 (up to approx.10/93)
Preliminary work:
Instrument cluster removed (Removal and installation of the instrument cluster ).
Operation no. of operation texts and work units or standard texts and flat rates:
| Instrument cluster housing | remove, install (Removal and installation of instrument cluster housing ). |
| Gauges | remove and install (Removal and installation of instrument cluster gauges ). |
| Outer bulb (arrow) | use special tool 129 589 00 09 00 to turn 90° to the left and remove, insert and turn 90° to the right. |
|
NOTE:
The inner bulbs are contained in scope of supply of electronic board.
|
|
| Coding connector (1) | turn 90° to the left and remove, insert and turn 90° to the right (pay attention to note). |
Note (only models 140.0)
Two characteristic curves are required for the fuel gauge as a result of two different fuel tanks (95 liters and 101 liters). The gauge is adapted by means of an adapter plug (arrow) on the electronic board of the instrument cluster (A1).
Special tool