Function of the injection system: - ra07236020010x(0010)
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
W. Handling electronic control units after accident repair Engine 602.96, 603.96/97 TURBO (Model 463.3: pay attention to deviations)
W. Handling electronic control units after accident repair
It is necessary to change electronic control units after an accident, if at least one of the following conditions is met:
- The housing is recognizably deformed or damaged.
- The supporting surface or console is deformed; the outside of the unit exhibits no damage.
- The plug connector is damaged or corroded by moisture.
- The functional check or the self-test of the equipment indicates faults.
When electrical components, e.g. ELR control unit, have been removed for repair work and then used again, these are to be checked in accordance with the existing documents after assembly.