Function of the injection system: - ra07146020010x(0010)
N. Electronic idle speed control (ELR) Engine 602.96, 603.96/97 TURBO (Model 463.3: pay attention to variations)
N. Electronic idle speed control (ELR)
Function
The starter ring gear speed sensor (L3) detects the engine speed (144 pulses/ revolution) and passes these in the form of an alternating voltage to the electronic idle speed control unit (N8) or to the ELR/ARA control unit (N8/1).
This processes the speed signal and performs a set/actual value comparison. Idling speed is maintained at a constant level by the actuator (Y22) irrespective of engine load.
Set idling speed is raised in accordance with a specified characteristic curve by the temperature sensor (B11/1) at coolant temperatures <60°C.
System diagnostics
Engine 602
The ELR system can be tested by means of the self-test routine integrated in the control unit. A signal can be retrieved with the test connector (X92 or X11/4), which provides concrete information regarding a component fault. The number of signals indicates whether and which component is faulty, or whether the components in the control loop are faulty.
Engine 603
Engine 603 is fitted with a control unit with diagnostics as of 05/88. Control unit designation: RO2 (was RO1).
| Pulse readout | Component | ||
|---|---|---|---|
| 1 | All functions "in order" | ||
| 2 | Engine speed signal "fault" | ||
| 3 | Coolant temperature "fault" | ||
| 6 | ELR control loop "fault" (1) | ||
|
|||
Location of components