Removal and installation of center shift - AR27.60-P-0900A
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION 722.5
| Removal and installation | |||
| 1 | Unhook shift rod (10) by removing clip locking device (49) | ||
| 2 | Disconnect plug from D-contact switch (S16/9) | ||
| 3 | Press lug (arrow) downwards and remove cover | ||
| 4 | Loosen fixing clamps (41) with screw (42) | ||
| 5 | Unhook wire cables (40L) and (40B) at center shift | ||
| 6 | Unscrew hexagon bolts (6) (4 pieces) | ||
| 7 | Remove center shift upwards | ||
| Dismantle and assemble center shift | AR27.60-P-0920A | ||
| 8 | Install in reverse sequence | ||
| 9 | Adjust parking lock interlock | AR27.60-P-0960A |