LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Transmission - 140 Chassis) >> Testing & Repair >> Remove brake of overdrive (BS) and clutch (KS), install - AR27.50-P-0740A >> Removal of overdrive brake piston - AR27.50-P-0740-02A

Removal of overdrive brake piston - AR27.50-P-0740-02A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull off damping spring (195).
  2. Remove locking ring (190) and remove cam spring (191).
    Fig 1: Identifying Locking Ring, Damping Spring And Cam Spring
    G04679409Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  3. Pull overdrive brake piston (192) out of the housing using 2 flat-jawed pliers
  4. Remove Teflon rings (196) and then the thrust washer (173).
    Fig 2: Identifying Overdrive Brake Piston, Teflon Rings And Thrust Washer
    G04679410Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals