LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Automatic Transmission - 140 Chassis) >> Testing & Repair >> Dismantling and assembling transmission (section 4) - AR27.50-P-0780A >> Removal of brake band B2 - AR27.50-P-0780-03A

Removal of brake band B2 - AR27.50-P-0780-03A

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove pressure pin (28).
    Fig 1: Identifying Pressure Pin
    G04633116Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  2. Position brake band B2 (27) at an angle, compress and remove.

    IMPORTANT

    Transverse cracks in brake band lining B2 are of no consequence

  3. Withdraw thrust member B2 (29).
  4. Remove sealing ring from transmission housing.
    Fig 2: Identifying Brake Band And Thrust Member
    G04633117Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
scientia non olet · About LEMON Manuals