Transmission range recognition switch, location / task / design / function - GF27.19-P-5101G
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION 722.6 in MODEL 170, 202, 208, 210 without touch shift
TRANSMISSION 722.6 in MODEL 129, 140
| Transmission range recognition switch, location | The gear identification switch (S16/10) is located in the floor selector. | ||
| Transmission range recognition switch, task | To convey the respective position of the selector lever and the program selector switch W/S (S16/10s2)to the ETC control module N15/3). | ||
| Transmission range recognition switch, design | The gear identification switch (S16/10) consists of the shift range contacts for all gears, the W/S program switch (S16/10s2), the reverse lamp switch (S16/10s1) as well as 10 LEDs (70) for the background illumination and the individual position display. | ||
| Transmission range recognition switch, function | The selector lever positions are transferred to the gear identification switch (S16/10) by a plug pin, which is connected to the shift shaft, and processed into a position signal. This signal is passed to the ETC control module (N15/3). |