Replacement of ignition cable with M3 cable screw - ra15lh1040512x(0512)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Engine 104 LH-injection

Operation No. of operation texts and operation values or standard texts and flat rates:

Fig 1: Removing Ignition Cable With Electrician's Pliers (1 Of 2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Removing Ignition Cable With Electrician's Pliers (2 Of 2)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

NOTE: The ignition cables are available in the parts market only in meter lengths. For this reason, the connection parts should be fitted on with electricians pliers before installing the ignition cables.

Ignition cables	cut to length.
Ends of ignition cables	bare over 6 mm.
Sleeve of cable screw	fit on and attach with the electricians pliers first of all to the insulation then to the core of the ignition cable.
Markings for individual cylinders on the ignition cables	fit on.
Spark plug connector	screw on.

Special tool

Fig 3: Identifying Special Tool 15 (000 589 55 37 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.