Separating oil pump chain - AR18.10-P-2140-01AO

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Chain Separating Tool (602 589 02 33 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 2: Identifying Thrust Pins (602 589 05 63 01)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 3: Identifying Thrust Spindle (602 589 05 63 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Fig 4: Identifying Case (602 589 00 98 00)

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Unbolt oil pump gear (arrow).

Fig 5: Locating Oil Pump Gear
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Use chain separating tool (01) 602 589 02 33 00 to separate oil pump chain (2). Position thrust pin (03) 602 589 05 63 01 against chain pin (arrow) for this step, screw in thrust spindle (02) 602 589 05 63 00 and press out chain pin.

Fig 6: Identifying Chain Separating Tool, Oil Pump Chain And Thrust Pin
Courtesy of MERCEDES-BENZ OF NORTH AMERICA.