LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Exhaust Manifolds, Emission Control - 140 Chassis) >> Testing & Repair >> Removing and installing front left exhaust manifold - AR14.10-P-3960F

Removing and installing front left exhaust manifold - AR14.10-P-3960F

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 120.98 

Showing engine 120.980/981 

Fig 1: Identifying Front Left Exhaust Manifold Remove/Install Components - Showing Engine 120.980/981
G04678577Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Fig. item, etc Work instructions    
IMPORTANT Removing and installing complete exhaust system   AR49.10-P-7000F
  Air injection pipe on cylinder head and on engine block unscrew and push to outside  
12 Self-locking nuts IMPORTANT Replace  
    TORQUE SPECIFICATION *BA14.10-P-1001-01B 
156c Exhaust manifold IMPORTANT Remove, replace from above.
If necessary after checking ↓
 
    Replace riveted nuts in exhaust manifold AR49.10-P-5531-01DA
156/2 Gaskets IMPORTANT To assist assembly, apply spots of sealing compound. Closed metal surfaces point towards cylinder head *BR00.45-Z-1010-01A 
TORQUE SPECIFICATION EXHAUST MANIFOLD

Number Designation Engine 120
BA14.10-P-1001-01B Exhaust manifold nut Nm 30
REPAIR MATERIALS

Number Designation Order number
BR00.45-Z-1010-01A Sealant A 001 989 25 20