LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Engine Timing - 140 Chassis) >> Repair & Adjustments >> Matching camshaft adjuster parts (05-2190) >> Matching parts of camshaft adjusters - RA05001192190X(05-2190)

Matching parts of camshaft adjusters - RA05001192190X(05-2190)

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

Flanged shaft 

Fig 1: Matching Parts Of Camshaft Adjusters - Flanged Shaft
G04677611Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Engine 119.96 Engine 119.97

Adjusting piston 

Fig 2: Matching Parts Of Camshaft Adjusters - Adjusting Piston
G04677612Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Engine 119.96 Engine 119.97

Camshaft sprocket 

Fig 3: Matching Parts Of Camshaft Adjusters - Camshaft Sprocket
G04677613Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 119.96 on left and right

Fig 4: Matching Parts Of Camshaft Adjusters - Engine 119.96 On Left And Right
G04677614Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 119.97 on left

Fig 5: Matching Parts Of Camshaft Adjusters - Engine 119.97 On Left
G04677615Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

Engine 119.97 on right

Cover 

Fig 6: Matching Parts Of Camshaft Adjusters - Engine 119.97 On Right
G04677616Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
Engine 104.98 Engine 104.99 Engine 111
  Engine 120 Engine 119
Engine 120
Engine 119.960 lt. and rt. 119.97 left 119.97 right Difference
Camshaft adjuster(1) 119 050 03 47 war
119 050 01 47
119 050 06 47 119 050 07 47 Part no.
Flanged shaft (chamfer at 3 holes) 119 051 01 84 war
119 050 00 89
119 051 02 84 Oblique angle
Oblique angle 11° 20' 21° 39' Flanged shaft and adjusting piston
Adjusting piston 119 051 02 37 119 051 04 37 Oblique angle
Oblique angle 11° 20' 21° 39' Flanged shaft and adjusting piston
Camshaft sprocket (2) 119 050 03 49 119 050 05 49 119 051 09 28 Sensor
Cover 119 051 47 03 Dimensions
Adjusting angle °CA 20 25 -
Sensor at camshaft 1 2 0 Qty. sprocket 1 2 0 Qty.
(1) For repair measures to eliminate knocking noises from the camshaft adjuster in hot countries, camshaft adjusters with 11° 20' inclined angle are supplied for engines 119.97. Part no. right 119 050 10 47 (without sensor), left 119 050 011 47 (2 sensors)
(2) The camshaft gear for engines 119.98 has a modified sensor position.