LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1995 >> C220 >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Engine Suspension - 140 Chassis) >> Testing & Repair >> Removing and installing rear engine mount - AR22.10-P-1160 >> Removing and installing rear engine mount - AR22.10-P-1160HW

Removing and installing rear engine mount - AR22.10-P-1160HW

WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.

ENGINE 601 in MODEL 124, 201, 202 

ENGINE 602 in MODEL 124, 201 

ENGINE 603 in MODEL 124, 140 

A Models 124, 140 and 201 (models with hydraulic front engine mount) 

Fig 1: Identifying Rear Engine Mount Removal/Install Components - Models 124, 140 And 201
G04715292

B Model 202 with engine 601 

Fig 2: Identifying Rear Engine Mount Removal/Install Components - Model 202 With Engine 601
G04715293

C 4MATIC vehicles 

Fig 3: Identifying Rear Engine Mount Removal/Install Components - 4MATIC Vehicles
G04715294

D Models 126 and 201 (models with front rubber mount) 

Fig 4: Identifying Rear Engine Mount Removal/Install Components - Models 126 And 201
G04715295
Fig. item, etc. Work instructions    
  Transmission support  
  Engine mount
Pay attention to notes on rear engine mount		 remove AH22.10-P-0001-01A 
    TORQUE SPECIFICATION *BA22.10-P-1002-01J 
    TORQUE SPECIFICATION *BA22.10-P-1003-01J 
    TORQUE SPECIFICATION *BA22.10-P-1004-01J 
    TORQUE SPECIFICATION *BA22.10-P-1005-01J 
    TORQUE SPECIFICATION *BA22.10-P-1006-01J 
    TORQUE SPECIFICATION *BA22.10-P-1008-01J 
    IMPORTANT 4MATIC: If the rear engine mount is replaced, the engine stop has to be set after driving a distance of approx. 1,000 and 10,000 km, respectively. ra22006010220x
TORQUE SPECIFICATION ENGINE MOUNTS, ENGINE SUPPORTING BRACKETS

Number Designation Engine 601 in model 201 with front rubber engine mounts Engine 601, 602, 603 in model 124, 140, 201 with front hydraulic engine mounts, with front hydraulic engine mounts except engine 603.913/963 (4 MATIC)
BA22.10-P-1002-01J Bolt of rear engine mount to engine supporting bracket Nm - 25
BA22.10-P-1003-01J Bolt of rear engine supporting bracket to body Nm 45 45
BA22.10-P-1004-01J Bolt of front engine supporting bracket to engine mount Nm 25 55
BA22.10-P-1005-01J Nut/bolt of rear engine mount to transmission Nm 70 70
BA22.10-P-1006-01J Adjusting bolt of engine stop to rear engine mount Nm 30 -
BA22.10-P-1008-01J Bolt of rear engine supporting bracket to engine stop Nm 25 -
TORQUE SPECIFICATION ENGINE MOUNTS, ENGINE SUPPORTING BRACKETS

Number Designation Engine 601 in model 202 Engine 603.913/963 (4 MATIC) in model 124.2/3
BA22.10-P-1002-01J Bolt of rear engine mount to engine supporting bracket Nm 25 -
BA22.10-P-1003-01J Bolt of rear engine supporting bracket to body Nm 40 40
BA22.10-P-1004-01J Bolt of front engine supporting bracket to engine mount Nm 55 20
BA22.10-P-1005-01J Nut/bolt of rear engine mount to transmission Nm 40 20
BA22.10-P-1006-01J Adjusting bolt of engine stop to rear engine mount Nm - 45
TORQUE SPECIFICATION ENGINE MOUNTS, ENGINE SUPPORTING BRACKETS

Number Designation Engine 603 in model 126 with front rubber engine mounts
BA22.10-P-1003-01J Bolt of rear engine supporting bracket to body Nm 45
BA22.10-P-1004-01J Bolt of front engine supporting bracket to engine mount Nm 25
BA22.10-P-1005-01J Nut/bolt of rear engine mount to transmission Nm 70
BA22.10-P-1006-01J Adjusting bolt of engine stop to rear engine mount Nm 30
BA22.10-P-1008-01J Bolt of rear engine supporting bracket to engine stop Nm 25
scientia non olet · About LEMON Manuals