Removing and installing firewall pivot point with accelerator pedal lever - AR30.12-P-3022D
WARNING: This page does not describe the selected car, but rather 42 other vehicles, including the 1999 Mercedes-Benz S600, 1999 Mercedes-Benz S500, 1999 Mercedes-Benz S420, 1999 Mercedes-Benz S320, and 1999 Mercedes-Benz CL600. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 124, 129, 140, 202, 461, 463 (except, 463.244 /245 /247 /248 /249 /250 /254 /309 /322 /323 /332 /333)
MODEL 124, 463, 461
Shown on model 124
Fig 1: Identifying Firewall Pivot Point With Accelerator Pedal Lever Components - Model 124, 463, 461
MODEL 129, 140, 202
Fig 2: Identifying Firewall Pivot Point With Accelerator Pedal Lever Components - Model 129, 140, 202
| Removing, installing | |||
| 1 | Remove/install accelerator pedal | AR30.12-P-1321D | |
| 2 | Remove firewall pivot point (34) together with accelerator pedal lever (33) | ||
| 3 | Pull firewall pivot point (34) off accelerator pedal lever (33) | By pulling off the retainer (34/1) |
|
| Retainer for accelerator pedal lever modified | Model 140 | BT30.12-P-0001-01A | |
| 4 | Install in the reverse order | ||
| Checking | |||
| 5 | Check and adjust throttle control linkage | Engines 111, 104 | AR30.10-P-1010D |
| Engine 119.97 with ASR code 471a | AR30.10-P-1010EA | ||
| Engine 119.97 without ASR code 471a | AR30.10-P-1010EB | ||
| Engine 119.98 | AR30.10-P-1010EC | ||
| Engine 120.980/81 | AR30.10-P-1010F | ||
| Engine 120.982/83, engine 606.964 | AR30.10-P-1010FA | ||
| Engine 602.983 in model 461 | AR30.10-P-1010GG | ||
| Engines 604.910, 605.910/960 in model 202 with automatic transmission 722.4 | AR30.10-P-1010HB | ||
| Engine 605.910/960 with manual transmission 717.4 Engines 605.910/960, 606.961 with automatic transmission 722.6 |
AR30.10-P-1010HC |